Back to index

---

The next step is to route the chambers. You can see where I drew some different options because I wasn't sure which way I wanted the grain orientation.

---

Here's the book matched top glued up and sanded. I came up with a design for the F-hole that I like. Its a bit of a nod to the traditional, but a little more relaxed (if that makes any sense :)

---

"Mike was here!"

After a quick trip through the drum sander to remove my doodles, its time to glue the cap on.

---

Cut to shape and routed for pickups.

---

---

---

<< Prev | Back to index | next >>